Battery testing machine for any rechargeable battery with-in the range of 0 - 5V system, capable of handling 0 - 5 amps for cycle testing to test the battery. RPE teams up with Neware to bring you a battery tester for all your battery testing needs.
This item takes 10 - 20 business days to ship to your location with instruction on how to connect please contact RPE for more information in regards to this product.
Specifications
- AC input AC 220V ±10% 50Hz / AC 110V ±10% 50Hz
- Resolution AD：16bit；DA：16bit
- Input impendence ≥ 500MΩ (power on), LC=100uA(power off)
- Input power 500 w
- Features 4 ranges, high acquisition frequency, high accuracy
- Channels control mode Independent control
Voltage
- Voltage output Charge：0.7 V~5V；Discharge：0.7 V~5V（0.5m data wire）
- Lowest output voltage 0.7 V（0.5m data wire）
Accuracy ± 0.02% of FS
- Stability ±0.005% of FS
Current
Current output ranges
- Range 1: 0.1uA---150uA
- Range 2：140uA---5mA
- Range 3：4.5mA---150mA
- Range 4: 140mA---5A
Accuracy
- ± 0.02% of FS
- Range 1: ± 30nA
- Range 2：± 1uA
- Range 3：± 30uA
- Range 4: ± 1mA
- Stability ±0.005% of FS
Power
- Output power/CH 25W
- Stability ± 0.01% of FS
Time
- Current response time <= 100μS (10% to 90% or 90% to 10%);
- Testing step time range >=10ms
- Data record conditions Time △t：>=1ms
Data record Data record conditions
- Time △t：>=1ms
- Voltage △U：>= 1mV
- Current △I：>= 100nA
- Frequency 1000Hz , Pulse
Charge
- Modes CC, CCCV, CV, CP, CR
- End conditions Voltage, Current, △t, Capacity, Energy, Power
Discharge
- Modes CC, CP, CR, Pulse
- End conditions Voltage, Current, △t, Capacity
Pulse
- Charge CC, CP
- Discharge CC, CP
- Min. pulse width 400μs
- Pulses counts Up to 16 changes in each pulse
- End conditions Voltage, △t
- DCIR Can be calculated by software
Cycle
- Max cycles 65535
- Max steps in each cycle 255
- Max cycle nest 4
Protection Safety protection
- Power-off data protection
- Off-line operation mode
- User-defined protection conditions, such as upper and lower limited current/voltage, delay time, temperature, etc.
- Data acquisition method Kelvin connection
- Database MySQL
- Data export Xls, txt
- Communication Ethernet
- Channels 8
- Dimensions 48*33*13（cm）
- Clamps 204 Air-plug, Polymer or alligator available
- Operating system Windows 7 for the best
- Operation and storage environment requirement
Items Values
- Operation environment temperature
- 0℃~40℃ (When the temperature is 25±10℃, the accuracy error caused by
- temperature change is less than50ppm /℃)
- Storage environment temperature -10℃~50℃
- Operation environment humidity ≤70% RH(no moisture condensation)
- Storage environment humidity ≤80% RH(no moisture condensation)
