5 Volt 6 Amp Battery Tester

by Neware
$1,500.00

Battery testing machine for any rechargeable battery with-in the range of 0 - 5V system, capable of handling 0 - 6 amps for cycle testing to test the battery. RPE teams up with Neware to bring you a battery tester for all your battery testing needs. 

This item takes 10 - 20 business days to ship to your location with instruction on how to connect please contact RPE for more information in regards to this product.

Items Values

  • Input AC AC 110V ±10% / 50Hz
  • Input power 709 W
  • Resolution AD:16bit;DA:16bit
  • Input impendence ≥1MΩ

Voltage

  • CV output range 0.025V~5V
  • Min discharge voltage 2.5V
  • Accuracy ± 0.1% of FS
  • Stability ± 0.1% of FS

Current

  • Output range/channel 0.05A~10A
  • Accuracy ± 0.1% of FS
  • CV cut-off current 0.02A
  • Stability ± 0.1% of FS

Power

  • Output power/channel 50 W
  • Stability ± 0.2% of FS

Time

  • Current rsponse time Max rising time:20ms
  • Working step time ≤(365*24)h/step Time format-00:00:00.000(h、m、s、ms)

Data

Data record conditions

  • Min data record interval:100ms
  • Min voltage change:10mV
  • Min current change:20mA
  • Frequency 10Hz

Charge

  • Charge modes CC、CV、CCCV、CP、CCCV forbattery pack
  • Cut-off condition Voltage、Current、Time、Capacity、-△V

Discharge

  • Discharge modes CV、CP、CR
  • Cut-off condition Voltage、Current、Time、Capacity、-△V

Pulse

  • Charge CC、CP
  • Discharge CC、CP
  • Min pulse width 500ms
  • Pulse counts Up to 32
  • Chg and Dischg switch Supported
  • Cut-off condition Voltage、Time
  • DCIR Supported
  • CH parallelIf output current > 100A, then supported, in parallel mode pulse function is disabled

Cycles

  • Max cycles 65535
  • Max steps 254

Nest 3

  • Power-off data protection

Protection

  • Off-line operation mode
  • User-defined protection conditions, such as
  • upper and lower limited current/voltage, delay
  • time, temperature, etc.

Hardware protection

  •  Full proof protection with hardware protection level IP20

Channels feature

  • Independent pairs of closed loop for constant

Channels control

  • mode Independent control

Data acquisition method

  • Kelvin connection
  • Noise <85dB
  • Database MySQL
  • Communication TCP/IP
  • Data Export Excel, TXT, PDF
  • Disk space 500GB
  • Leak current 0.005mA
  • OS Windows 7,
  • Communication port Ethernet port

Operation and storage environment requirement

  • Items Values
  • Operation environment temperature
  • 0℃~40℃ (When the temperature is 25±10℃, the
  • accuracy error caused by temperature change is less than50ppm /℃)
  • Storage environment temperature -10℃~50℃
  • Operation environment humidity ≤70% RH(no moisture condensation)
  • Storage environment humidity ≤80% RH(no moisture condensation)